An extensive range of specially blended solvents designed not only to give exceptional cleaning performance but also to improve the working properties of blankets and rollers.

kleenol 501 is an effective, powerful cleaner for blankets, rollers and dampers. It can be used to clean blankets and rollers by wet cloth with water, saturated cloth with kleenol 501 and dried cloth.

kleenol 601 is a blanket, roller and damper cleaner, containing solvents, detergents and rejuvenators. When it is used in conjunction with water it will quickly remove water soluble matter.

kleenol 701 is an effective, powerful cleaner for blankets, rollers and dampers. For automatic blanket washup device, finish with water wash after automatic wash for 2~3 minutes. For automatic roller washup device, apply to top roller and allow to circulate throughout the entire system. Apply squeegee to remove loosened ink.

kleenol 901 is a biodegradable, water miscible detergent for removing water based inks. It is consisting of a blend of detergents, surfactants, and solvents. It quickly removes both wet and dried water based inks from inks fountains, ink pumping systems, anilox rollers and photopolymer printing plates and dies.

kleenol 903 is non-water miscible blanket and roller wash with excellent ink solvency ink solvency properties and controlled drying speed for everyday use.

 

A comprehensive range of plate cleaners.
Plate treatment and Gums will suit all applications and requirements.

Superine 100 is a CTP Plate cleaner developed for removing ink and desensitizing digitally imaged, conventional and thermal (baked and unbaked) plates.

Superine 101 is a general purpose plate cleaner designed for everyday use with excellent desensitizing and ink removal properties.

Superine 300 is versatile plate cleaner for both positive and negative presensitized plates.
It will rapidly remove conventional and UV inks and at the same time desensitize scratches and oxidation marks. As well as helping to strengthen the image, it will also provide protection during short press stops.
KleeUniversal Plate cleaner is designed for use with all conventional, thermal and CTP plates both as an ink remover, desensitizer and scratch remover.

 

It provides the same performance as natural gum products but is easier to re m ove after plate sto rage.

Aqueous Gum is a gum arabic solution designed to match the performance of gum arabic. It can be used in place of Gum arabic for the following application. During plate making, either in automatic processors or for hand processing.
At the press as a general desensitizer or for plate protection during press stoppages. As a short to medium term storage gum.

Plate Gum is developed to provide an ideal combination for use with automatic plate recovery or cleaning machines. Also it is low viscosity, high purity, micro filtered product specially designed to operate in plate recovery units.
When the plate is to be reused KLD-2000 is easily removed from the plate with water and will ensure quick, clean start-up with reduced waste levels.

 

KLD-100 is a gum arabic solution designed to match the performance of gum arabic. It can be used in place of Gum arabic for the following application. During plate making, either in automatic processors or for hand processing. At the press as a general desensitizer or for plate protection during press stoppages. As a short to medium term storage gum.

  • Suitable for manual, immersion and machine development
  • 12 month shelf life
  • Fast working
  • Consumption rate typically 10m2 per liter
  • Compatible with most positive working plates
 

Wet Kleen Fabric-805 is the pre-impregnated cloth with the cleaning agent and medium for Off-set Printing Ink.

  • All Wet Kleen Fabric-805 have passed a quality inspection before delivery to ensure the highest possible uniformity.
  • All Cleaning Agents are developed to have maximum cleanability for the application.
  • A high cleanability will ensure a minimal consumption of Wet Kleen Fabric-805.
  • Features
    - An environmental friendly cleaning process with low VOC consumption.
    - No pumps and containers for cleaning agent.
    - A minimum of down-time.
    - Always nice cleaning result due to use of Wet Kleen Fabric-805 at all times.
    - It's pretty easy to operate and change Wet Kleen Fabric-805.
    - Easy installation and maintenance.
    - Best print quality.
    - Elimination of environmental hazards.

Dry Kleen Fabric-804 is a cloth without the cleaning agent and medium for Off-set Printing Ink.

  • Keep the blanket clean without any dust, shag, contaminant and so on.
  • The fast removal of Ink and solvent on the blanket completely.
  • Make the quality of print higher without waste of cleaning solvent.
  • Raise the productivity of printing.
  • Easy installation and maintenance.
 

  • A blanket and roller wash.
  • Ecological washing fluid for blanket and ink rollers.
  • Non-aromatic and naphthene with corrosion inhibitors.
  • Suited for automatic blanket washing systems.
  • Strong ink dissolving capacity.
  • Ecosol 1216 is designed not only to give exceptional cleaning performance but also to improve the working properties of blankets and rollers
 

  • UV Wash for blankets and rollers.
  • Ecological washing fluid for blankets and ink rollers when using UV inks.
  • Eco UV 8520 can be used in both conventional and UV sheeted.
  • Special development for printing factories that use both conventional and UV-inks on the same printing press.
 

  • Best image contrast both before and after development.
  • Completely aqueous developer without any solvent.
  • Suitable for all application.
  • Developer yield is the highest.
  • Reliability damping latitude.
  • Fine even grain minimizing dot gain and maximizing resolution.